Embedding Accessories
Electron Microscopy Sciences T-Sue™ Microarray Mold Kit, 3 mm
T-Sue array molds are specifically designed to be simple, easy to use and inexpensive. The tissues can be analyzed in consistent conditions enhancing the efficiency of the research. Allow you to perform TMAs more quickly with excellent results. By using array molds, you can process up to 170 specimens onto one single slide in very little time.
Made of silicone, these molds can withstand temperatures between -100 deg C to +250 deg C and be reused hundreds of times without losing their flexibility.
Each kit includes one T-Sue array mold and four punch needles with stylet.
Size: 3 mm
Capacity: 36 cores
Andwin Scientific CRYOMOLDS PK/100CRYOMOLDS
The Cryomold molds produce uniformly shaped, flat-surface specimen block when used with O.C.T. (optimum cutting temperature) compound, which is sold separately, for frozen sectioning. This can fit into Cryobar freezing wells of the Tissue Tek II microtome/cryostat with the use of an adapter. This product measures 25mm x 20mm.
Electron Microscopy Sciences T-Sue™ Microarray Mold Kit, 2 mm
T-Sue array molds are specifically designed to be simple, easy to use and inexpensive. The tissues can be analyzed in consistent conditions enhancing the efficiency of the research. Allow you to perform TMAs more quickly with excellent results. By using array molds, you can process up to 170 specimens onto one single slide in very little time.
Made of silicone, these molds can withstand temperatures between -100 deg C to +250 deg C and be reused hundreds of times without losing their flexibility.
Each kit includes one T-Sue array mold and four punch needles with stylet.
Size: 2 mm
Capacity: 24 cores
Andwin Scientific 15 x 15 x 5 mm, 12/cs, Tissue-Tek Base Molds for Uni-Cassette Systems
15 x 15 x 5 mm, 12/cs, Tissue-Tek Base Molds for Uni-Cassette Systems
Electron Microscopy Sciences Micro-Bed Embedding Resin 500 ML
Micro-Bed resin is a water-soluble resin, a mixture of acrylate and polyester resins. Universal embedding medium that may be used for light or electron microscopy.
Due to its non-crosslinking characteristics, its hydrophilic nature, and roughness of its section surface, it is excellent in preserving tissue structure, offers good results in immunolabeling, and stands up well to conventional stains.
In LM, tissues were stained with conventional histological stains (e.g.,hematoxylin-eosin) and embedded in Micro-Bed: results comparable with those provided on paraffin embedded tissues. Polychrome silver-based and cytochemical stains (e.g.,PAS) were also feasible. In TEM, images as good as those obtained with similar acrylic resins, (e.g., Lowicryl K4M), were obtained.
Supplied as a single component-ready to use pre-mixed resin. Micro-Bed can be polymerized by heat (55-65°C) or UV (365nm) at -10 to 20°C for 72 hours.
Polysciences, Inc. Peel-A-WayEmbedding Mold (Square - S22)
Peel-a-Waya Embedding Mold (Square - S22). Disposable paraffin molds designed to in.Peel-a-Way in. from the solidified embedded block. Be sure to consider Polyciences' Polyfin and Peel-a-Way Micro-Cut Paraffin for use with Peel-a-Way molds. May also be used for epoxy and acrylic resin embedding procedures. Features: - Polyethylene - 22mm x 22mm square - 20mm deep - 288 molds per case
Ted Pella Inc SEAL N FREEZE LARGE 50/PK
SEAL'N FREEZE® CRYOTRAY®Cryo Embedding Molds.-- Large: 25 L x 30 W x 20mm D (1 L x 1.2 W x 0.8" D), pkg/50 trays (200 molds). The SEAL’N FREEZE® CRYOTRAY® is a compact system of plastic cryo embedding molds with attached sealable lids. This tray system allows for batch processing of tissue samples in perfect uniform blocks that are ideal for cryo sectioning and storage.Each disposable plastic SEAL’N FREEZE® CRYOTRAY® includes four individual molds which can be easily separated from the center connector by folding and tearing along the perforated borders.
Electron Microscopy Sciences Cold Embedding Silicone Mold for Acylic Resin 40 mm
This mold is for acrylic resins only and the best mounting cup for all of our acrylic resins. The flexible silicone rubber makes it very easy to remove the mount from the mounting cup.
Diameter: 40 mm
Electron Microscopy Sciences Lowicryl HM20 Monostep 225 GR
The same as our Lowicryl complete kits but this new formulation allows you one stop embedding without all of the cumbersome preparation and mixing. This pre-mixed, ready to use resin, saves you time and minimizes chemical contact. MonoStep Lowicryl is ideal for use in immunohistochemistry and immunolabeling. Store at room temperature.
Cayman Chemical STI7genral STI often found 1ea
Oliogonucleotide recipes are optimized for Bio-Rad CFX96 or CFX384. Includes 4 tubes: • Tube 1: 5X Primers and probes for 4 pathogens and human control • Tube 2: Synthetic positive controls • Tube 3: Spike-in RPP30 control • Tube 4: 2X qPCR enzyme mastermix Organism Type: Bacteria (no cell wall), Bacteria Gram-, Protozoan, Multiplexed Reaction Panels: STI, Vaginal microbiota Colors: Cy5 (Mycoplasma genitalium), Cy5.5 (Neisseria gonorrhoeae), FAM (Chlamydia trachomatis), HEX (RPP30), TEX615 Instruments: Bio-Rad CFX96 or CFX384 (Trichomonas vaginalis)
Cary Company Size #3, 75 Micron - Nylon Monofilament Mesh Liquid Filter Bag, Plastic "P" Flange Ring (NMO75P3P-A), Available for Purchase in Increments of 50.
The 21WM43 is a 75 Micron size #3 (4.12" x 8") Nylon Monofilament Mesh Iiquid filter bag with plastic ring. These nylon mesh bags are a single strand mesh designed for economical use and suitable for applications using vessel or open filtration systems. Industries that would need liquid filter bags consist of chemical, food, paper, petroleum, adhesives, paints and many others. Autoseam construction creates a seam inside of the filter.
Alkali Scientific CellPro Polyester Biopsy Bags
Optimize specimen processing and preservation with CellProPolyester Biopsy Bags designed for solvent and acid resistance with a durable synthetic mesh (0 2mm) These high-quality biopsy bags provide a secure and efficient solution for histological applications ensuring maximum tissue safety and seamless fluid exchange Available in three sizes30 x 45mm 45 x 75mm and 75 x 95mmto accommodate a range of sample types Solvent and acid-resistant polyester material for enhanced durability 0 2mm synthetic mesh allows optimal fluid exchange for thorough specimen processing Secure tissue containment prevents sample loss during fixation and processing Three size options to fit various specimen needs CellProbiopsy bags offer a practical and efficient method for handling biological specimens Simply pour the fixative and sample directly into the bag where the mesh design ensures effective filtration while securely containing the biopsy for accurate histological analysis Once sealed the biopsy bag
Electron Microscopy Sciences Embedding Shelf for Shandon
This removable shelf can be installed below the opening of the cryostat in the most convenient and location available. The selves can be made in various sizes to accommodate most instruments.
Electron Microscopy Sciences Embedding Cassette Disposable Base Mold, 30 x 24 mm, 5 mm height
Clear plastic. Eliminates use of cleaning solvents and release compounds.
Footprint: 30 x 24 mm
Height: 5 mm
Electron Microscopy Sciences Molding Cup Tray, 5 mm height
These polyethylene trays are ideal for casting specimen blocks embedded with JB-4 or equivalents and are used with our block holders and chucks shown above.
Size: 6 x 12 mm
Height: 5 mm